esp32-c3 beetle v1.0.0

86xx/led3xdrv-pro.yml

@@ -0,0 +1,74 @@
+esphome:
+  name: led3xdrv
+  friendly_name: Led 3x
+
+esp8266:
+  board: esp12e
+
+logger:
+
+api:
+  encryption:
+    key: "qHvgYr1RgkorYHuCq5kaolpW8Og8TUcV3YZH0KE8ndk="
+
+ota:
+  - platform: esphome
+    password: "d1e7d153acd8591234576da1844f822f"
+
+wifi:
+  ssid: "Lothlorien"
+  password: "LitwoOjczyznoMojaTysJestJakZdrowie"
+
+web_server:
+
+output:
+  - platform: esp8266_pwm
+    pin: GPI12
+    id: led_pwm01
+    frequency: 20000 Hz # 20 kHz – bez pisku i bez migotania w kamerze
+  - platform: ledc
+    pin: GPI13
+    id: led_pwm02
+    frequency: 20000 Hz # 20 kHz – bez pisku i bez migotania w kamerze
+  - platform: ledc
+    pin: GPIO14
+    id: led_pwm03
+    frequency: 20000 Hz # 20 kHz – bez pisku i bez migotania w kamerze
+
+light:
+  - platform: monochromatic
+    name: "LED PWM 1"
+    output: led_pwm01
+    gamma_correct: 1.0
+  - platform: monochromatic
+    name: "LED PWM 2"
+    output: led_pwm02
+    gamma_correct: 1.0
+  - platform: monochromatic
+    name: "LED PWM 3"
+    output: led_pwm03
+    gamma_correct: 1.0
+
+sensor:
+  - platform: wifi_signal
+    name: "WiFi RSSI"
+    id: wifi_rssi
+    update_interval: 30s
+
+  - platform: uptime
+    name: "Uptime (s)"
+    id: uptime_s
+    update_interval: 60s
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO7
+      mode:
+        input: true
+        pullup: false
+        pulldown: true
+    name: "Czujnik ruchu SR505"
+    device_class: motion
+    filters:
+      - delayed_off: 2s

esp32-c3-oled/led3xdrv-pro.yml

@@ -1,50 +1,41 @@
 esphome:
-  name: oled-test
-  friendly_name: oled test
+  name: led3xdrv
+  friendly_name: Led 3x
 
 esp32:
   board: esp32-c3-devkitm-1
-  framework:
-    type: esp-idf
+  variant: esp32c3
 
-# Enable logging
 logger:
+  baud_rate: 0
 
-# Enable Home Assistant API
 api:
   encryption:
-    key: "rNfuxXEaIvVuOHvYVdb4QpW8fezbbkKn3wvjkHdHGkY="
+    key: "naGRefDq/h5OWxKuRx+Wo7lJbgz9ynFkUajsMPrBrY4="
 
 ota:
   - platform: esphome
-    password: "5aa6ac416280761455b83922c266822b"
+    password: "2fd6ea54e1209c9ce76a7d9392108b71"
 
 wifi:
   ssid: "Lothlorien"
   password: "LitwoOjczyznoMojaTysJestJakZdrowie"
 
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Esp32-C3-Oled-Test"
-    password: "Zto2fEEcWgnS"
-
-captive_portal:
-
 web_server:
 
 output:
   - platform: ledc
     pin: GPIO4
     id: led_pwm01
-    frequency: 20000 Hz # 20 kHz – bez pisku i bez migotania w kamerze
+    frequency: 20000 Hz
   - platform: ledc
-    pin: GPIO3
+    pin: GPIO5
     id: led_pwm02
-    frequency: 20000 Hz # 20 kHz – bez pisku i bez migotania w kamerze
+    frequency: 20000 Hz
   - platform: ledc
-    pin: GPIO10
+    pin: GPIO6
     id: led_pwm03
-    frequency: 20000 Hz # 20 kHz – bez pisku i bez migotania w kamerze
+    frequency: 20000 Hz
 
 light:
   - platform: monochromatic
@@ -66,23 +57,6 @@ button:
   - platform: safe_mode
     name: "Restart in Safe Mode"
 
-i2c:
-  id: bus_oled
-  sda: GPIO5
-  scl: GPIO6
-  frequency: 100kHz
-  scan: true
-
-# --- Czcionki do wyświetlacza (wygodne, ale możesz zmienić na swoje) ---
-font:
-  - file: "fonts/Roboto-Regular.ttf"
-    id: f12
-    size: 8
-  - file: "fonts/Roboto-Bold.ttf"
-    id: f20
-    size: 11
-
-# --- Przydatne sensory do pokazania na ekranie ---
 sensor:
   - platform: wifi_signal
     name: "WiFi RSSI"
@@ -94,16 +68,6 @@ sensor:
     id: uptime_s
     update_interval: 60s
 
-text_sensor:
-  - platform: wifi_info
-    ip_address:
-      name: "IP"
-      id: ip_addr
-    ssid:
-      name: "SSID"
-      id: wifi_ssid
-
-# --- Przycisk BOOT (ten „użytkowy”; RESET/EN nie da się odczytać) ---
 binary_sensor:
   - platform: gpio
     pin:
@@ -112,6 +76,7 @@ binary_sensor:
       inverted: true
     name: "BOOT Button"
     id: btn_boot
+
   - platform: gpio
     pin:
       number: GPIO7
@@ -123,19 +88,3 @@ binary_sensor:
     device_class: motion
     filters:
       - delayed_off: 2s
-
-# --- Wyświetlacz OLED ---
-display:
-  - platform: ssd1306_i2c
-    model: "SSD1306 72x40"
-    address: 0x3C
-    rotation: 0
-    i2c_id: bus_oled # <- to jest kluczowe
-    lambda: |-
-      {
-        if (id(ip_addr).has_state()) {
-          it.printf(0, 0, id(f12), "ip:%s", id(ip_addr).state.c_str());
-        } else {
-          it.printf(0, 0, id(f12), "ip: (brak)");
-        }
-      }